Team Members: Heather, Joe, Kian
THIS TEAM IS THE BEST!
. how did you set up each individual's tasks?
. please take carefully a look at this file. You can see vary qualities of analyses precedent analyses.pdf
I found Spotlights with similar characteristics of ours and found a commonality in their manufacturing. The plastic housing in each one I found was made of PP, or Polypropylene Plastic. This is one of the lightest plastics available, which is fitting because this flashlight is made to be portable in times of emergency. PP is manufactured in the same way that all thermal plastics are.
Exercise 2.0
Joe
- measured top view of the strobe light
Kian
- measured the top side view and bottom side view
Heather
- measured the other side view and bottom view
Exercise 2.1
Joe
- Part A (parts inventory) and Part E (organization of the parts)
Kian
- Part B (geomentric descriptions) and Part D (Porportion studies)
Heather
- Part C (morphology and modeling)
Exercise 2.2
Joe
- Did the shadow puppets in a series
Kian
- Illumination of water and corner of wall
Heather
Exercise 2.3
Joe
- Fabrication and Assembly Investigations
Kian
- Material Quality Investigations
Heather
TEAM STRATEGY:
Our strategy is to narrate the exciting life of an emergency flashlight! We plan on taking our object on a journey through the architecture building and documenting its use and operation in different locations. We brainstormed possible uses for the flashlight such as illuminating an object, making shadow puppets, and making creepy faces when you are telling a ghost story.
|
Contact Info
. Joe Dembowski
Cell: 404-625-9235
E-mail: jdembowski3@gatech.edu
. Kian Sadri
Cell: 404-788-4870
E-mail: ksadri3@gatech.edu
. Heather Eierman
Cell: 404-275-4684
E-mal: heierman3@gatech.edu
Resources
. similar shape and function??
Useful website link
. http://www.electronics-online.savingshour.co.uk/25144LG38R.html
. http://www.madehow.com/Volume-6/Flashlight.html/
|
